49
Setting Items
The system setting items are summarized as follows:
Common Operations
Describes common operations in system settings.
Note
If a setting that does not display a dialog in a web browser is enabled, it may not be possible to operate the Settings Page. In this case,
close and restart the web browser.
Applying Configuration Changes
When a setting is changed on the Settings Page, the [Apply] and [Clear] buttons in the upper right of the Settings
Page are no longer grayed out and can be clicked.
In this situation, if [Apply] is clicked, the changed settings will be applied.
Click [Clear] to revert to the previous settings.
Category
Item
Description
Video and audio
HDMI/SDI
Setting the common output signal method for HDMI/SDI and 3G-SDI
mapping (P. 51)
IP Streaming Video
General settings of the video, such as video size and quality sent
from the camera (P. 52)
Audio
Setting the bit rate for audio input from a microphone connected to
the camera or IP audio streaming (P. 54)
Server
HTTP/Video
Setting the HTTP Server and video server (P. 56)
RTP
Communication setting using RTP Server (P. 57)
Communication
Network
Setting the network to which the camera is connected (P. 59).
Wireless LAN
Setting the access point or IPv4 settings (P. 62) for direct connection
of the camera and Wireless LAN enabled device.
External Connection (IP)
Setting the communication protocol for IP connection of the camera
with external devices such as controllers (P. 64).
External Connection
(serial)
Settings for serial connection of the camera (P. 66)
Security
Certificate Management
Settings for certificate creation and management (P. 68).
SSL/TLS
Encrypted communications and server certificate settings (P. 69).
User Management
Add/delete and set operating privileges for administrator account
information and authorized users (P. 70).
Host Access Restrictions
Setting separate access controls for access from IPv4 and IPv6
addresses (P. 72).
System
Camera
Camera Name and camera Installation Conditions, Tally Lamp, IR
remote controller, and Genlock settings (P. 74).
Date and Time
Camera date and time settings (P. 76).
Environment
Frame frequency settings (P. 78).
Language
Display language settings (P. 79).
Maintenance
General
Device information and settings, license verification, reboot and
initialization settings (P. 80).
Backup/Restore
Perform backup and restoration (P. 82).
Update Firmware
Perform firmware update (P. 83).
Log
Log display and downloading message (P. 84).
