Canon CR-N300 Page 25 Settings Manual Download

Page: 25 / 119

Set the camera angle by operating the camera's pan, tilt and zoom.

Note

Camera control by clicking and dragging does not guarantee exact precision.

Operation by Clicking on the Video Display Area or by Slider



Click Operation

When clicking on the video display area, the camera angle moves so that the position of the mouse pointer is at the

center.

If a single click does not center to the desired location, repeat the operation.

Note

When operating [Focus], the camera angle cannot be centered by clicking on the video display area.



Slider Operation

Dragging the pan and tilt slider knobs pans and tilts the camera.

Drag the zoom slider knob to operate the zoom.

The slider knob moves even if clicking the slider on the point without the knob.

Fine tune the pan, tilt, and zoom positions by clicking the

, or T or W buttons.

Camera Operation

Zoom

lider

Move up to zoom in (telephoto) or down
to zoom out (wide angle).

Tilt

lider

Move the camera up or down.

Pan

lider

Move the camera left or right.

Summary of Contents for CR-N300
























































































































Search results

Summary of Contents for CR-N300

Reviews:

Related manuals for CR-N300

Brands by name

Popular brands

Canon CR-N300, Settings Manual

Search results

Summary of Contents for CR-N300

Reviews:

Related manuals for CR-N300

Brands by name

Popular brands