Canon CP-300, User Manual, Page: 84 / 204

80
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
Adjustment of Printing Results
Fine Adjustment of Print Position and Cut Length
Depending on your print media and the environment, the print position may be
shifted or cut length may be diff erent from the setting. If you cannot get the result
you expected even after setting the cut length and margins, fi ne-tune the print
position and cut length.
For this product, the following adjustments can be set for each type and size of print
media.
Function Details
Top adjust Fine-tune the print start position.
Vertical adjust Fine-tune the print position in the vertical direction.
Length adjust Fine-tune the cut length.
IMPORTANT
• If the situation is not improved by adjusting the adjustment function, clean the transport
roller.
(P.154)
Also, make sure that there is no dirt on the print media.
■
Fine-tuning of the Print Start Position ( Top Adjust)
[Example] When printing on a tube (Ø6.0mm) in the "Centered" position, the text
is shifted to the left, so move the print start position 2.0 mm to the
right.
ABCD ABCD
Move the print start position
2.0 mm to the right.
1
Press the [Option] key.
2
Use [
▲
] or [
▼
] to select "Print adjust" and press the [Enter] key.
File
Print adjust
Setting
Option