Canon CP-300, User Manual, Page: 49 / 204

45
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
Surround Text with a Frame
This allows you to surround text with a frame. The default setting is "None."
Pump Room
[Example] Enclosing text in a frame.
1
Display the page where you want to change the frame settings.
2
Press the [Format] key.
3
Use [
▲
] or [
▼
] to select "Frame" and press the [Enter] key.
Format setting
Orientation
Frame
4
Use [
▲
] or [
▼
] to select "On," and then press the [Enter] key.
The display returns to the character input
display.
The frame shapes setting can be checked
on the display.
Off
On
Frame
˛
NOTE
• The frame can be set for each page.
• When the cut length is specifi ed, the frame may not be set.
• Depending on the settings of the number of lines, character size, cut length, etc. and the
size of the print media, the frame may not be printed correctly.
• No error message will be displayed even if the print data extends beyond the width (top
and bottom) of the print media. Refer to
"Maximum Printable Character Size (P.44)"
for
information on character size and frame settings.