Canon CP-300, User Manual, Page: 27 / 204

23
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
5
Insert the tube.
For tubes (round)
Insert the tip of the tube
into the media feed port
in the direction shown
in the figure, and push it
in until it hits transport
roller 2.
Transport roller 2
For and flat tubes
Insert the tip of the flat
tube into the media feed
port in the direction
shown in the figure, and
push it in until it hits
transport roller 2.
Transport roller 2
NOTE
• If it is diffi cult to pass the tube through the
attachment, set the tube in place while pressing the
tube retainer lever with your fi nger.
IMPORTANT
• If the tip of the tube is inserted as shown in the
fi gure, the tube may get stuck during printing, the
print may be chipped, or the cut position may be
off .
• If the tip of the tube is bent due to winding, etc., fi x it so that it is straight, or cut off the
bent portion before placing it in the printer.
• To prevent the print media from running out during printing, or to prevent the shortened