Canon CP-300, User Manual, Page: 190 / 204

186
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
Message Details/Solution
Power turned off when
deleting fi le.
Checking saved data.
Check the saved fi les. If the fi le has not been deleted,
delete it.
Feed error
Media is jammed in the
feeding path.
The print media jammed during printing. Follow the
instructions on the screen to remove the jammed
print media.
(P.170)
No ribbon information.
Ribbon remaining
amount can t be
displayed. Information could not be read from the IC chip in the
ribbon cassette. Or, a ribbon cassette that has already
been used up has been loaded.
Press any key and follow the instructions on the
screen.
Power cycle the printer. Turn the power back on. If the same message
appears again, contact your place of purchase.
As warmer temp.
didn
’
t rise enough,
warmer was turned off .
Turn off the printer, and re-set the tube warmer in
place again.
(P.31)
If the same message appears
again, contact your place of purchase.
As warmer temp.
couldn
’
t be controlled,
warmer was turned off .
Turn off the printer and
check the AC adapter. Turn off the power, unplug the AC adapter from
the power outlet, and then contact your place of
purchase.
Communication error
Reconnect to host
device.
Press any key.
Perform PC connect again to send data.
Battery is running low.
OK to continue?
The battery level is low. If you select "Yes," you can
continue printing. When you have fi nished printing,
turn off the power once. After that, replace the
batteries or connect the AC adapter.