Canon CP-300, User Manual, Page: 101 / 204

97
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
Adjusting the Cut Motion
If it does not cut well when you change the print media, adjust the Motion of the
cut. Adjustment can be set for both "Half cut" and "Full cut."
NOTE
• If the cutter blade is becoming less sharp, adjust the depth of the cut.
(P.92)
■
Changing the Motion of the Half Cut
The motion of the half cut can be set for each type and size print media. The default
setting is set to "Normal."
[Example] The half cut of the label tape (12 mm) is not cut properly, so make the
cut one step intenser.
1
Press the [Option] key.
2
Use [
▲
] or [
▼
] to select "Print adjust" and press the [Enter] key.
File
Print adjust
Setting
Option
3
Use [
▲
] or [
▼
] to select " Half Cut Motion" and then press the [Enter]
key.
ɻɻ
Adjustments
Half Cut Depth
Half Cut Motion
Full Cut Depth
4
Use [
▲
] or [
▼
] to select "Label," and press the [Enter] key.
Half Cut Motion
Clear tube
Shrink tube
Label