manualshive.com logo in svg

Canon ColorWave 3800, Operation Manual

Share
Download
Canon ColorWave 3800 Operation Manual Download Page 69

Restore the factory defaults 

Introduction

Sometimes you want to go back to the initial settings. You can restore the factory default settings
in WebTools Express.

NOTE

Log in as a Key Operator to only restore the Key Operator settings. Log in as a System

Administrator to only restore the System Administrator settings. To restore all the factory

default settings you must log in as a Power User.

Procedure

1.

Open the [Configuration] tab, or the [Preferences] tab.

2.

Click on [Restore defaults] in the upper right-hand corner of the screen. A window opens.

3.

Click [Ok] to restore the factory default settings, or [Cancel] to close the window without restoring
the factory defaults.

Restore the factory defaults

Chapter 3 - Define your workflow with WebTools Express

69

Summary of Contents for ColorWave 3800







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands