Canon ColorWave 3800, Operation Manual

Page: 285 / 358

Load a media roll
Introduction
You can load standard and custom media on your printer.
Before you begin
Before you load a roll on the printer, make sure your media is enabled.
• For standard media you must enable a media profile in WebTools Express. For more
information, see
Configure the media profiles
on page 185 .
• Make sure the size is enabled in WebTools Express. For more information, see
Configure the
media sizes
on page 188 . If your media size is not present in the list, you can create a custom
media size. For more information, see
Create a custom media size
on page 187 .
IMPORTANT
• Do not use dented media rolls to prevent damage to the imaging devices.
• Do not open the media drawer during the print process.
• Do not open more than one media drawer at the same time to prevent overbalance of the
printer.
CAUTION
Watch your fingers when you handle the media roll.
Procedure
1.
Pull firmly to open the media drawer.
2. Place the new media roll on the roll loading station.
Load a media roll
Chapter 5 - Maintain the printing system 285