manualshive.com logo in svg

Canon ColorWave 3800, Operation Manual

Share
Download
Canon ColorWave 3800 Operation Manual Download Page 272

Clear the system

When to do

On the user panel, you can remove all print and copy jobs from the system.

Procedure

1.

Tap on the system menu thumbnail in the dynamic bar. The system menu opens.

2.

Tap on [Clear system] in the list in the right part of the display.
A wizard opens.

NOTE

Make sure you have saved all the information. All print and copy jobs are removed.

3.

Follow the steps in the wizard and complete the procedure.

Result

After you have followed the steps, the system will reboot and all print and copy jobs are
removed.

Clear the system

272

Chapter 4 - Use the printing system

Summary of Contents for ColorWave 3800







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands