Canon ColorWave 3800, Operation Manual

Page: 234 / 358

Setting Settings values Function
[Scale] [1:1] Scales the image to the original size.
[To media size] Scales to the selected media width.
NOTE
You can only use this setting, when
a specific media roll is selected.
[To standard size] Scales the image to fit the media size you se-
lect from a list.
[Custom] Scales the image to a custom percentage.
10 - 1000%
Preset category: [Image]
Setting Settings
values Settings values Function
[Quality] [Scan qual-
ity] [Normal]
[High] Define the quality of the scan.
• Select [High] to scan with a higher resolu-
tion. This can prevent a moiré pattern for
originals that contain gray or colored areas.
• For pure CAD originals [Normal] is mostly
sufficient.
Select [Normal] when productivity is an impor-
tant factor.
[Print qual-
ity] [Automatic]
[High speed]
[Economy - fast]
[Economy]
[Production - fast]
[Production]
[Quality - fast]
[Quality]
[High quality - fast]
[High quality] Define the print quality of your output.
• Select [Automatic] for an automatic, optimal
print quality selection.
• Select the print quality from [High speed] to
[High quality], in which the quality increases
while the speed decreases.
In case of a fast and standard mode, the fast
mode is faster and uses less toner than the
standard mode, while the standard mode out-
put has a higher toner coverage.
[Color
mode] [Color]
[Grayscale] Define the default output in color or greyscale.
4
Advanced settings for copy jobs
234 Chapter 4 - Use the printing system