manualshive.com logo in svg

Canon ColorWave 3800, Operation Manual

Share
Download
Canon ColorWave 3800 Operation Manual Download Page 20

The components of the printer (back)

Component - function table

No

Component

Description / Function

1

[wheel] 

Swivel wheel with brakes.

2

[folder connection panel] 

Component to connect the folding device to.

3

[maintenance tray drawer] 

Drawer that gives access to the maintenance
tray, which collects residual toner.

4

[upper back cover] 

Cover at the back of the device, used to access
the machine for error recovery.

5

[power switch] 

Switch the main power supply on or off.
You can find the serial number of the printer on
the sticker above the power switch.

The components of the printer (back)

20

Chapter 2 - Get to know the printing system

Summary of Contents for ColorWave 3800







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands