Configure the finishing settings
Set the Finishing Assistant
Introduction
This setting is only available when a folder is installed .
The [Finishing Assistant] can automatically detect the legend (if present) of a drawing and rotate
and align the drawing so the legend will be on the cover page of the fold package. If no legend
can be detected the print is delivered unfolded.
When enabled, the [Finishing Assistant] overrules the default rotation and alignment settings for
folded output.
Procedure
1.
Open the [Preferences] - [Print job defaults] tab.
2.
Click on [Edit] in the [Layout] section, or click the [Finishing Assistant] setting.
3.
Select [Enabled] if the printer must automatically detect the legend of your drawings and fold the
drawings correctly.
4.
Click [Ok] to confirm, or [Cancel] to reject your entries.
Configure the finishing settings
Chapter 3 - Define your workflow with WebTools Express
139
Summary of Contents for ColorWave 3800
