Canon
imagePROGRAF MFP Z36 Service Support Guide
imagePROGRAF MFP Z36 Service Support Guide
June 2021
Page 16
C.
Installation Space Requirements
The imagePROGRAF MFP approximate installation space requirements may
differ, depending on how the imagePROGRAF MFP is configured. Always
ensure that there is enough space for service and operation of the device.
Refer to the imagePROGRAF Printer Service Manual for details on
transportation and installation of the printer.
IMPORTANT
•
Make sure at least 23.6" (600 mm) of space is available in front of the
imagePROGRAF MFP.
•
Make sure at least and at least .4" (10 mm) is available in back of the
imagePROGRAF MFP.
•
Make sure at least 7.9" (200 mm) is available on the left, and right sides of
the imagePROGRAF MFP.
•
Make sure at least 11.8" (300 mm) is available above the imagePROGRAF
MFP.
•
The floor must be level (with no bows) and flat for the stabilization and
support of the imagePROGRAF MFP.
•
The weight of the imagePROGRAF MFP is primarily supported by the
wheels.
Table 15 – imagePROGRAF TZ-30000 Installation Space Requirements
imagePROGRAF TZ-30000 MFP Z36 Installation Space
Width
Depth
Height
78”
1,981mm
66 1/8”
1,680mm
52 1/2”
1,331mm
