4
4-35
Network Setup options
Use Automatic Configuration
Yes/No [Yes]
This option appears if you chose DHCP or BOOTP as the protocol for automatically
obtaining the IP address of the ColorPASS.
Choose Yes and the ColorPASS uses a WINS name server and automatically obtains its
IP address. Make your choice and proceed to the Server Name option.
Choose No to proceed to the Use WINS Name Server option, where you specify
whether to use a WINS name server, and then to the WINS IP Address option, where
you specify its IP address.
Use WINS Name Server
Yes/No [No]
Specify whether to use a WINS name server. Broadcasts from SMB devices cannot pass
across a router without a WINS name server. Setting up the WINS name server is
outside the scope of this manual. To find out if a name server is available, contact your
network administrator.
WINS IP Address
[127.0.0.1]
This option appears only if you choose Yes for Use WINS Name Server. Change the
default address to the correct IP address for the WINS Name Server. Obtain the
correct address from your network administrator.
Server Name
Default Name
The server name is the name that will appear on the network for accessing the
ColorPASS via SMB. The default name is the same as the server name assigned in
Server Setup (see
Server Comments
Server comments (optional) can contain information about the printer. These
comments are listed in the ColorPASS Properties in Network Neighborhood and
can be up to 15 characters.