manualshive.com logo in svg

Canon ColorPass-Z7400, Configuration Manual

The Canon ColorPass-Z7400 Configuration Manual is a comprehensive guide designed to assist users in proper setup and configuration of their device. This essential manual can be downloaded for free from manualshive.com, enabling users to conveniently access and optimize their product's performance.

Share
Download
background image

4

4-9

ColorPASS Control Panel

Suspend Printing

Suspend communication between the ColorPASS and the copier. You 

must

 

suspend printing if you want to interrupt the current ColorPASS job and use the 
copier to make copies or print another job first. Jobs continue to process on the 
ColorPASS. After you make the copies, choose Resume Printing to continue 
printing jobs from the ColorPASS.

Resume Printing

Resume communication between the copier and the ColorPASS after you have 
finished making copies or printing other jobs. 

Shut Down

Shut down all ColorPASS activity in the correct manner and then restart. Use this 
option instead of the power switch on the back of the ColorPASS. The following 
options are available from the submenu that appears:

Restart Server

—Resets the server software but does not reboot the entire system. 

Network access to the ColorPASS is temporarily interrupted and all currently 
processing jobs are aborted and might be lost.

Shut Down System

—Shuts down all ColorPASS activity properly. 

Reboot System

—Shuts down and then reboots the ColorPASS.

Clear Server

Clear all jobs in all server queues, as well as all jobs archived on the ColorPASS hard 
disk drive, the index of archived jobs (in the Archive window), all FreeForm

™

 

masters, and the index of FreeForm masters (in the FreeForm window). Consult with 
your administrator or operator before choosing Clear Server. If an Administrator 
password has been set, you must enter it to access Clear Server. 

Run Setup

Enter the Setup menu and change Setup option settings. 

Run Diagnostics

This function is provided for service representatives only. For information about 
running diagnostics, contact your authorized service/support technician.

Tray Alignment

Adjust the placement of text and images on a page so that they are correctly 
aligned on the sheet of paper and both sides of a duplex sheet have the exact same 
alignment. For more information on this function, see the 

Job Management Guide

.

Calibration

Calibrate the ColorPASS using AutoCal

 

or ColorCal. For more information, see the 

Color Guide

. If an Administrator password has been set, you must enter it to access 

Calibration.

Summary of Contents for ColorPass-Z7400



















































































































































































































Reviews:

No comments

Related manuals for ColorPass-Z7400

Galleon NTS-4000-R Installation And Configuration Manual preview
NTS-4000-R
Brand: Galleon Pages: 35
IBM eserver xSeries 306 Option Installation Manual preview
eserver xSeries 306
Brand: IBM Pages: 46
H3C UniServer R2900 G3 Installation, Quick Start preview
UniServer R2900 G3
Brand: H3C Pages: 15
Supermicro SSG-2029P-ACR24H User Manual preview
SSG-2029P-ACR24H
Brand: Supermicro Pages: 136
IBM System x3650 M5 Installation And Service Manual preview
System x3650 M5
Brand: IBM Pages: 1010
Goonas LC180 User Manual preview
LC180
Brand: Goonas Pages: 13
Zonet ZPS3611 - QUICK Quick Installation Manual preview
ZPS3611 - QUICK
Brand: Zonet Pages: 1
TYAN TN70-B7016 Service Engineer'S Manual preview
TN70-B7016
Brand: TYAN Pages: 80
TYAN B8236G70W8HR-HE Service Engineer'S Manual preview
B8236G70W8HR-HE
Brand: TYAN Pages: 84
TYAN B5630G62FV10HR Service Engineer'S Manual preview
B5630G62FV10HR
Brand: TYAN Pages: 82
SMC Networks 2622W-P - annexe 1 User Manual preview
2622W-P - annexe 1
Brand: SMC Networks Pages: 83
Kramer KN-DSP100 User Manual preview
KN-DSP100
Brand: Kramer Pages: 28
Chip PC JackPC EFI6800 Specifications preview
JackPC EFI6800
Brand: Chip PC Pages: 4
AAxeon STW-602C User Manual preview
STW-602C
Brand: AAxeon Pages: 74
Multitech RASFinder RF300E User Manual preview
RASFinder RF300E
Brand: Multitech Pages: 199
SAP XI 3.1 Manual preview
XI 3.1
Brand: SAP Pages: 32
UNIVIEW VM8500-E Quick Manual preview
VM8500-E
Brand: UNIVIEW Pages: 44
Lantronix LPS1-T User Manual preview
LPS1-T
Brand: Lantronix Pages: 78

Brands by name

Popular brands

Load more brands