2
2-18
Setting up Network Servers
T
O
SET
UP
C
OLOR
PASS
PRINTING
ON
UNIX
SYSTEMS
1.
Specify the appropriate settings in ColorPASS Server Setup.
To access ColorPASS Setup, see
2.
Specify the appropriate settings in ColorPASS Network Setup.
Enter a valid IP address, subnet mask, and gateway address for the ColorPASS.
3.
Specify the appropriate settings in ColorPASS Printer Setup.
Publish the Print queue and/or Hold queue.
T
O
SET
UP
TCP/IP
FOR
COMMUNICATION
WITH
THE
C
OLOR
PASS
1.
A superuser (with root login) must add the ColorPASS to the network’s IP host table or
other system database of network printers.
2.
In the file or utility used by your network, specify the remote printer name, the print
server protocol, the queue, and the spool file for the ColorPASS name you assigned.
3.
Make the ColorPASS available as a printer to other network users.
4.
To verify the TCP/IP connection, ping the IP address or the host name. From any
computer on the network, at the command prompt, type:
ping <IP address>
Type the ColorPASS IP address assigned in ColorPASS Network Setup.
After the ColorPASS is set up as a network printer, you can also ping the name you
gave to the ColorPASS:
ping <hostname>
The server should respond with a message such as
Reply from <IP address> ...
Some systems will respond with a continuous display of output from the IP address.
To stop the output, type
Control-C.
You can use the
ping
command at any time.