xi
About this manual
This manual is intended for anyone who is responsible for integrating the
ColorPASS-Z7400 into a business environment that includes networked personal
computers. After setting up the ColorPASS-Z7400 and client workstations, individual
users can print to the ColorPASS-Z7400 as a high-performance color printer.
This manual describes how to set up network servers and clients to use the
ColorPASS-Z7400 and how to install user software and set up printing from Microsoft
Windows and Apple Mac OS computers. For general information on using the color
copier, your computer, your application software, or your network, see the manuals
that accompany those products.
N
OTE
:
The term “ColorPASS” is used in this manual to refer to the ColorPASS-Z7400.
The name “Aero” is used in illustrations to represent the ColorPASS. The term “copier”
is used to refer to the Canon CLC5000 series of copiers. The term “Windows” is used
to refer to Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows
XP, and Windows Server 2003, wherever appropriate. The term “Setup” is used to refer
to configuring the ColorPASS for proper performance in your network environment,
including settings that affect all jobs. The administrator can perform Setup from the
Control Panel, FieryBar, and Command WorkStation.
N
OTE
:
The term “job management tools” is used to refer to Command WorkStation,
Command WorkStation LE, and Fiery WebSpooler
™
.
The ColorPASS-Z7400 supports the CLC5000 series of copiers, including the
, , CLC5100, and CLC4000.
The ColorPASS includes support for the Fiery WebTools
™
and software for
Command WorkStation/Command WorkStation LE, which allow an operator to
manage all jobs sent to the ColorPASS. Although it may not be the case at all sites, the
documentation for this product assumes the presence of an operator who controls and
manages jobs sent by users from remote workstations.
Any additional connectivity or administrative features specific to the copier are
described in the
Release Notes.
Introduction
