manualshive.com logo in svg

Canon ColorPASS-Z5000, Color Manual

Share
Download
Canon ColorPASS-Z5000 Color Manual Download Page 157

8

8-9

QuarkXPress 3.32 for Mac OS and Windows

Optional color management from QuarkXPress

If you have additional color management requirements not offered by ColorWise, such 
as managing color on non-ColorPASS devices, you may want to consider using the 
color management features offered by QuarkXPress. For more information, see your 
QuarkXPress documentation.

QuarkXPress 3.32 for Mac OS and Windows

Before starting QuarkXPress 3.32, make sure the EfiColor XTension is not loaded in 
the XTensions folder. EFICOLOR profiles are not currently provided with ColorPASS 
products. Without the correct EFICOLOR profile, the EfiColor XTension cannot 
perform color conversions on placed images.

Windows version requirement

For the Windows version of QuarkXPress, make sure a copy of the ColorPASS PPD 
file is in the \XPRESS\PDF folder. 

Importing images

All RGB images placed in a document are affected by your RGB Source and Rendering 
Style settings. For best results with placed images, use the instructions in “Importing 
images” on page 8-2 and “CMYK simulation” on page 8-3. 

Summary of Contents for ColorPASS-Z5000























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands