manualshive.com logo in svg

Canon ColorPASS-Z5000, Color Manual

Share
Download
Canon ColorPASS-Z5000 Color Manual Download Page 145

7

7-15

Photoshop 4.x

Selecting options when printing

You can print RGB or CMYK images from Photoshop. 

• When you print RGB images, you can choose whether the conversion to CMYK 

data is performed by the ColorPASS (using a CRD), by PostScript (using PS Color 
Management), or by Photoshop (using Photoshop’s separation settings).

• When you print CMYK images, you can print composites or color separations.

N

OTE

:

You can not use the Combine Separations feature of the ColorPASS to 

recombine separations printed from Photoshop.

Printing RGB images

Use the following instructions to print RGB images. 

Choose whether to print in RGB or CMYK. (With the AdobePS 8.7 printer driver for 
Mac OS, these options appear in the Adobe Photoshop pane of the Print dialog box.) 

• If you select 

Print in RGB

, Photoshop sends RGB data to the ColorPASS and a CRD 

is used to perform color conversion. Choose the appropriate print option settings for 
RGB data (see Chapter 1).

N

OTE

:

The ColorPASS Rendering Style option specified will take effect if the 

ColorPASS RGB Source Profile option is set to None.

Click to print using a
ColorPASS CRD

Click to print using Photoshop’s 
separation settings

Summary of Contents for ColorPASS-Z5000























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands