Canon Colorado 1650, Operation Manual

Page: 10 / 384

About this guide
Introduction
The guide addresses the Colorado 1650 and is written for the printer operator.
It describes
the complete workflow of the printer
: from setup to the operation, maintenance and
troubleshooting of the machine.
Process Actions Reference
Before using the sys‐
tem
Components of the printer
Explore the system on page 29
Daily use Use the RIP software Configure media in the RIP on
page 40
Load, wind, and cut media Handle the media on page 37
Print a job Print a job on page 165
Improve quality
Improve quality on page 263
Maintenance Maintain the print quality
Maintain the print quality on
page 174
Maintain the rest of the printer
Maintain the printer on page 202
Network and security
Network and security options
Configure the network and security
settings on page 273
Troubleshooting
Clear jams, stop the printer
General troubleshooting on
page 323
Clean polluted parts
Clean pollution on the printer on
page 361
Operator skill level
This guide describes safeguards for the protection of an instructed person. Instructed person is a
term applied to persons who have been instructed and trained by a skilled person, or who are
supervised by a skilled person, to identify energy sources that may cause pain and to take
precautions to avoid unintentional contact with or exposure to those energy sources.
About this guide
10 Chapter 1 - Introduction