manualshive.com logo in svg

Canon Color imageRUNNER LBP5970, User Manual

Share
Download
Canon Color imageRUNNER LBP5970 User Manual Download Page 248

5-43

Pr

inting En

vironment Settings

5

SETUP Menu Settings

Specify OFF for this item when you want to match the setting of the orientation or 
printing side for the last page with those for its previous page, such as when you 
want to print previously printed paper etc. whose printing orientation or printing 
side is fixed.

NOTE

The setting is effective only when 2-SIDED PRINT. is set to ON.

QUALITY MENU Options

RESOLUTION

FINE*, SUPER FINE

Specifies the resolution for when processing print data.

Resolution is indicated in "dpi" that indicates the number of dots per inch, and the 
larger the value is, the higher precision you can print at.

If FINE is specified, the printer prints in the Fine mode at 600dpi. This mode is 
appropriate for printing general text or charts at a high speed.

If SUPER FINE is specified, the printer prints in the Super Fine mode at 1200dpi. 
This mode reproduces text and outlines of diagrams clearly with a fine resolution. 
This mode is appropriate especially for printing data that contain many small 
letters.

IMPORTANT

If TEXT, GRAPHICS, or IMAGE in the following items is set to ERR DIFFUSION, 
and this item is set to SUPER FINE, ERR DIFFUSION changes to HIGH RESOL..
- B & W HALFTONES and COLOR HALFTONES in HALFTONES in the QUALITY 

MENU options in the SETUP menu

- B & W HALFTONES and COLOR HALFTONES in the PDF1.5 menu
- B & W HALFTONES and COLOR HALFTONES in the PS menu

●

About memory amount required for using the Super Fine mode

Printing in the Super Fine mode requires a large amount of memory for data 
process. Therefore, depending on the amount or type of data, the message 
<39 SPL MEM.FULL> may appear, disabling printing. In this case, print with 
RESOLUTION set to FINE and GRADATION LEVEL to HIGH 1, or install an 
optional expansion RAM module as needed. For details on the optional 
expansion RAM modules, see Getting Started Guide.

Summary of Contents for Color imageRUNNER LBP5970







































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands