Canon Color imageRUNNER LBP5280, Service Manual, Page: 69 / 284

2
2
2-50
2-50
Technical Reference > MEAP > MEAP Application Management > Starting, Stopping, or Uninstalling the MEAP Application
Technical Reference > MEAP > MEAP Application Management > Starting, Stopping, or Uninstalling the MEAP Application
MEAP Application Management
■ Outline
You can use the MEAP application management screen to perform basic management tasks
of the MEAP application (start, stop, uninstall), or check the device's resource information.
■ Starting, Stopping, or Uninstalling the MEAP Application
● Procedure to start and stop a MEAP application
1) Log in to the SMS. (Refer to 'Login to SMS' in this manual.)
2) Click [ Application List ]. (If the Application List is already being displayed, this operation is
not necessary.)
3) Click [ Start ] or [ Stop ] button shown for the MEAP application to be started or stopped.
F-2-92
4) Check to see that the status of the MEAP application in question is either [ Started ] or [
Stopped ].
● If the MEAP application cannot be started
If the conditions to start the MEAP application are not satisfied, the MEAP application cannot
be started.
If the MEAP application cannot be started, check the following items.
Is a valid license installed?
If the license has expired, you cannot start the application. If the license has already expired,
obtain a new license and then update the license. ( See "Managing the License File" in this
manual.)
Are the necessary resources available?
If the resources such as memory capacity or number of threads are not sufficient, the
application also cannot be started.
Delete any unnecessary data to secure sufficient resources.
If the application still cannot be started after checking the foregoing conditions, contact the
support department of the sales company.
F-2-93