manualshive.com logo in svg

Canon Color imageRUNNER LBP3460, User Manual, Page: 253 / 296

Share
Download
Canon Color imageRUNNER LBP3460 User Manual Download Page 253

7-42

T

roub

leshooting

7

When You Cannot Obtain Appropriate Printout Results

Nothing is printed on the paper.

Cause 1

The toner cartridge was installed with the sealing tape still attached.

Remedy

Take the toner cartridge out of the printer, pull out the sealing tape, and reinstall 
the toner cartridge. (See "Replacing the Toner Cartridge," on p. 6-2)

Cause 2

Multiple sheets of paper were fed at a time.

Remedy

Align the paper stack in the paper cassette or multi-purpose tray properly and 
load it again. If you are using transparencies or labels, fan them thoroughly and 
load them again. (See "Printing from the Paper Cassette," on p. 3-21, "Printing 
from the Multi-purpose Tray," on p. 3-38)

Cause 3

A problem has occurred inside the printer.

Remedy 1 If <Ennn-nnnn> is displayed in the display, turn the power OFF, wait for 10 

seconds or longer, and then turn the power ON again. This may clear the 
message.

Remedy 2 If the message does not disappear even after applying the Remedy 1, contact 

your local Canon dealer for servicing.

 

Print Quality Problems

White streaks appear.

Cause 1

Toner in the toner cartridge is running out.

Remedy

Take the toner cartridge out of the printer, shake it gently 5 or 6 times to evenly 
distribute the toner, and then reinstall the toner cartridge. If this does not solve 
the problem, replace the toner cartridge with a new one. (See "Replacing the 
Toner Cartridge," on p. 6-2)

Cause 2

The drum in the toner cartridge has deteriorated.

Remedy

Replace the toner cartridge with a new one. (See "Replacing the Toner 
Cartridge," on p. 6-2)

Printed pages have white specks.

Cause 1

Appropriate paper is not being used.

Remedy

Replace the paper with one that can be used and print again. (See "Paper 
Requirements," on p. 3-2)

Summary of Contents for Color imageRUNNER LBP3460









































































































































































































































































































Reviews:

No comments