manualshive.com logo in svg

Canon Color imageRUNNER LBP3460, User Manual, Page: 239 / 296

Share
Download
Canon Color imageRUNNER LBP3460 User Manual Download Page 239

7-28

T

roub

leshooting

7

Message List

<38 LOW IMAGE QLTY>

<Error Skip>

Cause

The printer cannot process the data because it is too complicated.

Remedy 1 The printer continues printing by pressing [Online]. However, the printer prints 

with the image quality level being lowered.

Remedy 2 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 5-27) 

in the QUALITY MENU options in the SETUP menu to STANDARD, and then 
print again.

Remedy 3 If you want to print without the image quality level being lowered, install an 

optional expansion RAM module, and then print again. (See Getting Started 
Guide)

<39 SPL MEM.FULL>

<Error Skip>

Cause

Because spool memory has run out, the printer cannot print.

Remedy 1 The printer continues printing by pressing [Online]. However, the page with 

which an error has occurred are not printed.

Remedy 2 Perform a soft reset in the RESET menu, specify the paper size smaller, and 

then print again.

Remedy 3 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 5-27) 

in the QUALITY MENU options in the SETUP menu to STANDARD, and then 
print again.

Remedy 4 If 2-SIDED PRINT. in the FEEDER MENU options in the SETUP menu is set to 

ON, specify OFF, and then print again.

Remedy 5 Change the setting for HALFTONES (See p. 5-28) in the QUALITY MENU 

options in the SETUP menu, and then print again.

Remedy 6 Install an optional expansion RAM module, then print again. (See Getting 

Started Guide)

<41 CHK PAPER SZE>

Cause 1

The size of the paper loaded in the multi-purpose tray or paper cassette is 
different from the setting for TRAY PAPER SIZE, CASSETTE1 SIZE, or 
CASSETTE2 SIZE specified from the computer or control panel.

Remedy

Match the size specified in "TRAY PAPER SIZE" (See p. 5-17) and the size of 
the loaded paper, and then press [Online].

Summary of Contents for Color imageRUNNER LBP3460









































































































































































































































































































Reviews:

No comments