manualshive.com logo in svg

Canon Color imageRUNNER LBP3460, User Manual, Page: 235 / 296

Share
Download
Canon Color imageRUNNER LBP3460 User Manual Download Page 235

7-24

T

roub

leshooting

7

Message List

<13 PAPER JAM>

Cause

Paper is jammed inside the printer

Remedy

Remove the jammed paper and set the paper cassette and covers to the 
original position. If the printer is not online, press [Online]. (See "Paper Jams," 
on p. 7-4)

IMPORTANT

•

If paper jams have occurred at multiple areas at the same time, the areas appear in the 
display by rotation.

•

If you have removed the jammed paper without opening any cover, be sure to open and 
close the front cover once, and then press [Online].

<14 NO TONER CART>

Cause

The toner cartridge is not installed or installed improperly.

Remedy

Install the toner cartridge properly. (See "Replacing the Toner Cartridge," on p. 
6-2)

<16 PREPARE TONER>

(Warning Message)

Cause

The toner cartridge needs to be replaced soon.

Remedy

Take the toner cartridge out of the printer, shake it gently 5 or 6 times to evenly 
distribute the toner, and then reinstall the toner cartridge. If the message is 
displayed or white patches appear on the images even after applying this 
remedy, replace the toner cartridge with a new one. If the printer is not online 
after closing the front cover, press [Online]. (See "Replacing the Toner 
Cartridge," on p. 6-2)

<16 CHECK TONER>

Cause

The toner cartridge needs to be replaced soon.

Remedy

Press [Online]. Take the toner cartridge out of the printer, shake it gently 5 or 6 
times to evenly distribute the toner, and then reinstall the toner cartridge. If the 
message is displayed or white patches appear on the images even after 
applying this remedy, replace the toner cartridge with a new one. If the printer is 
not online after closing the front cover, press [Online]. (See "Replacing the 
Toner Cartridge," on p. 6-2)

NOTE

The message takes several seconds to disappear after the toner cartridge is installed.

Summary of Contents for Color imageRUNNER LBP3460









































































































































































































































































































Reviews:

No comments