Canon Color imageRUNNER LBP3460 User Manual Download Page 199

Page: 199 / 296

6-28

Routine Maintenance

Adjusting the Printing Position

Each time you press [

], the value increases in +0.1 mm increments, and each

time you press [

], the value decreases in -0.1 mm increments. If you keep

holding down [

] or [

], the speed of the value changing is increased.

"=" is displayed on the left of the value, and the printing position is specified.

Press [Online] to place the printer online.

Press [Utility].

Select PRNTPOSNPRINT using [

] and [

], then press [OK].

The printing position adjustment print in which the setting is changed is printed.
Check the printout results to confirm the printing position.

To make further adjustment, repeat Step 1 to 9.

-5.0

→

=-5.0

→

UTILITY MENU

CONFIG.PAGE

→

PRNTPOSNPRINT

→

EXECUTING

Summary of Contents for Color imageRUNNER LBP3460









































































































































































































































































































Search results

Summary of Contents for Color imageRUNNER LBP3460

Reviews:

Canon Color imageRUNNER LBP3460, User Manual, Page: 199 / 296

Search results

Summary of Contents for Color imageRUNNER LBP3460

Reviews: