manualshive.com logo in svg

Canon Color imageRUNNER LBP3460, User Manual, Page: 179 / 296

Share
Download
Canon Color imageRUNNER LBP3460 User Manual Download Page 179

6-8

Routine Maintenance

6

Replacing the Toner Cartridge

If the message does not disappear or the print is too thin even after performing the 
procedure above, replace the toner cartridge with a new one.

Replacing the Toner Cartridge

Replace the toner cartridge with a new one using the following procedure.

WARNING

Do not throw a used toner cartridge into open flames, as this may cause the 
toner remaining inside the cartridge to ignite, resulting in burns or a fire.

CAUTION

Take care not to allow the toner to come into contact with your hands or 
clothing, as this will dirty your hands or clothing. If they become dirty, wash 
them immediately with cold water. Washing with warm water will set the toner 
and make it impossible to remove the toner stains.

IMPORTANT

•

Dispose of the packing materials according to local regulations.

•

Be sure to use only the toner cartridges designed for this printer.

NOTE

For details on handling toner cartridges, see "Precautions for Handling Toner Cartridges," 
on p. 6-16.

1

Open the front cover.

While pressing the lever on the top of the front cover, open it gently.

Summary of Contents for Color imageRUNNER LBP3460









































































































































































































































































































Reviews:

No comments