manualshive.com logo in svg

Canon Color imageRUNNER C3380 Series, Reference Manual

Share
Download
Canon Color imageRUNNER C3380 Series Reference Manual Download Page 514

Sample Reports

9-4

9

Appendix

■

SHEET x COPIE

Prints the number of pages in each copy set and the number of sets made.

■

RESULT

Prints "OK" or "NG."

"OK" is printed when the print job completes successfully.

"NG" (No Good) is printed if an error occurs during the print job. The error code or "STOP" 
is also printed next to "NG."

 

Device Information Delivery Destination List

The Device Information Delivery Destination List contains information about 
registered delivery destinations. You can print this list from Register Destinations 
under Transmitting Settings in Device Information Delivery Settings in System 
Settings (from the Additional Functions screen). (See "Printing the Delivery 
Destinations," on p. 6-51.)

■

DESTINATION

The IP addresses of the registered destination machines are printed. 

■

DEST. RECEIVABLE DATA

The data receivable at the registered destinations is printed.

■

AUTO DELIVERY

"On" is printed if Auto Delivery Settings in Transmitting Settings in Device Information 
Delivery Settings in System Settings (from the Additional Functions screen) are set for the 
registered destination. "Off" is printed if Auto Delivery Settings are not set for the 
registered destination. 

■

AUTO DELIVERY DATA

The data that is delivered automatically is printed if Auto Delivery Settings in Transmitting 
Settings in Device Information Delivery Settings in System Settings (from the Additional 
Functions screen) are set for the destination. 

*******************************************************************

*******************************************************************

*******************************************************************

07/06/2006 THU 13:58

iR C3380

001

1 1 1 . 1 1 . 1 1 1 . 1 1 1

2 2 2 . 2 2 . 2 2 2 . 2 2 2

3 3 3 . 3 3 . 3 3 3 . 3 3 3

D E S T I N A T I O N

-

-

-

O f f

O f f

O f f

D E P T .   I D

A D D R E S S   B O O K

D E P T .   I D

A D D R E S S   B O O K

D E P T .   I D

A D D R E S S   B O O K

D E S T .   R E C E I V A B L E   D A T A A U T O   D E L I V E R Y

D E V I C E   I N F O R M A T I O N   D E L I V E R Y   D E S T I N A T I O N   L I S T

A U T O   D E L I V E R Y   D A T A

Summary of Contents for Color imageRUNNER C3380 Series







































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands