manualshive.com logo in svg

Canon Color imageRUNNER C3380 Series, Reference Manual

Share
Download
Canon Color imageRUNNER C3380 Series Reference Manual Download Page 248

Adjusting the Machine

4-68

4

Customizing Settings

 

Adjusting Creep (Displacement) Correction

This mode enables you to adjust the displacement of pages that occurs between 
the outermost and center page when the Booklet mode is set.

1

Press 

 (Additional Functions) 

➞

 [Adjustment/Cleaning] 

➞

 

[Creep (Displacement) Correction Adjustment].

2

Select the desired paper type 

➞

 press [Adjust].

3

Press [

▼

] or [

▲

] to adjust the correction width 

➞

 press [OK].

NOTE

 

To enter values in millimeters, press [mm].

 

Automatic Gradation Adjustment

You can recalibrate the machine when you notice irregularities in the color of the 
copies or prints, such as when copies turn out to be different from the original in 
gradation, density, or color. 

The following two types of gradation adjustments can be made:

■

Quick Adjustment

This is a quick and simple adjustment that is made to the gradation, density, and color 
settings of the machine. Recalibrations are made internally without outputting any test 
prints.

■

Full Adjustment

This is a precise recalibration that is made to the gradation, density, and color settings of 
the machine. The procedure involves making test prints and placing them on the platen 
glass for scanning. Once this is complete, the machine automatically corrects the 
irregularities.

IMPORTANT

 

It is recommended that you select [Full Adjust] when performing an automatic gradation 
adjustment. Select [Quick Adjust] for a quick, but less complete adjustment between 
regular full adjustment recalibrations.

Summary of Contents for Color imageRUNNER C3380 Series







































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands