manualshive.com logo in svg

Canon Color imageRUNNER C3380 Series, Reference Manual

Share
Download
Canon Color imageRUNNER C3380 Series Reference Manual Download Page 247

Adjusting the Machine

4-67

4

Customizing Settings

IMPORTANT

 

•

Only use 12" x 18", 11" x 17", LGL, or LTRR paper for the saddle stitch staple 
repositioning procedure.

•

Make sure to remove all output booklets from the optional Booklet Tray before performing 
the saddle stitch staple repositioning procedure.

NOTE

 

•

Saddle stitch staple repositioning can be performed only if the optional Saddle 
Finisher-Y2 is attached.

•

Paper that is required for the saddle stitch staple repositioning procedure is automatically 
fed to the saddle stitcher unit by the machine.

1

Press 

 (Additional Functions) 

➞

 [Adjustment/Cleaning] 

➞

 

[Saddle Stitcher Staple Repositioning].

2

Press [Start].

 

Saddle Stitch Position Adjustment

If you are using the Saddle Stitch mode of the optional Saddle Finisher-Y2, and you 
notice that the folds of the paper are not exactly in the middle of the booklet, you 
can make adjustments to the saddle stitch position to compensate for this error. 

NOTE

 

The saddle stitch position can only be adjusted if the optional Saddle Finisher-Y2 is 
attached.

1

Press 

 (Additional Functions) 

➞

 [Adjustment/Cleaning] 

➞

 

[Saddle Stitch Position Adjustment].

2

Select the paper size for which you want to adjust the saddle 
stitch position.

NOTE

 

Some of the paper sizes displayed may not be available in certain countries.

3

Press [

▼

] or [

▲

] to adjust the saddle stitch position 

➞

 

press [OK].

Summary of Contents for Color imageRUNNER C3380 Series







































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands