manualshive.com logo in svg

Canon Color imageRUNNER C3380 Series, Reference Manual

Share
Download
Canon Color imageRUNNER C3380 Series Reference Manual Download Page 176

Card Reader-C1

3-48

3

Optional Equipment

NOTE

 

•

To cancel printing, press [Cancel].

•

To close the screen that is displayed while the machine is printing the Page Count 
List, press [Done].

•

The counter information can be printed only if 11" x 17", LGL, LTR, or LTRR (plain, 
recycled, or color paper) is loaded in a paper source that is set to 'On' when you 
press [Other] to select a paper source in Drawer Eligibility For APS/ADS in 
Common Settings (from the Additional Functions screen). (See "Auto Paper 
Selection/Auto Drawer Switching," on p. 4-33.)

4

Press [Done] 

➞

 [OK].

Clearing Page Totals

You can clear the page totals made for all departments or for specific departments.

1

Press 

 (Additional Functions) 

➞

 [System Settings] 

➞

[Dept. ID Management].

2

Press [Page Totals].

If necessary, see the screen shot is step 2 of "Checking and Printing Counter 
Information," on p. 3-47.

3

Press [Clear All Totals].

To clear one page total at a time by department, press [

▼

] or [

▲

] to display the 

desired department 

➞

 select the department 

➞

 press [Clear].

4

Press [Yes].

5

Press [Done] 

➞

 [OK].

Summary of Contents for Color imageRUNNER C3380 Series







































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands