manualshive.com logo in svg

Canon Color imageRUNNER C2880i, Sending And Facsimile Manual, Page: 289 / 470

Share
Download
Canon Color imageRUNNER C2880i Sending And Facsimile Manual Download Page 289

Storing New Addresses

10-9

10

Stor

ing/Editing Addr

ess

 Book 

Settings

IMPORTANT

 

If you want to attach a subaddress to your send job, make sure that the recipient's 
fax machine supports ITU-T standard subaddresses.

NOTE

 

•

The Line Selection drop-down list is displayed only if the optional Super G3 
Multi-Line FAX Board is installed.

•

If Use Asterisks to Enter Access No./Passwords in System Settings (from the 
Additional Functions screen) is set to 'Off', the password you enter is not displayed 
as asterisks. (See Chapter 6, "System Manager Settings," in the 

Reference Guide

.)

8

Finish storing the address.

●

If Access Number Management is set to 'On':

❑

Press [Next].

❑

Press [Access Number].

❑

Press [Access Number] 

➞

 enter the access number using 

 - 

 (numeric keys).

❑

Press [Confirm] 

➞

 re-enter the access number for confirmation 

➞

 press [OK] 

➞

 [OK].

If you do not want to set an access number for this destination, press [OK] 
without entering any number.

●

If Access Number Management is set to 'Off':

❑

Press [OK].

 

E-Mail Addresses

1

Press 

 (Additional Functions) 

➞

 [Address Book Settings] 

➞

 

[Register Address] 

➞

 [Register New Address].

If necessary, see the screen shots in step 1 and step 2 of "Fax Numbers," on 
p. 10-5.

[Auto]:

A line is selected according to the settings you made for TX Line 
Selection in Dual Line Options under <Fax Settings> in 
Communications Settings (from the Additional Functions screen). 
(See "Selecting the Line for Sending," on p. 9-52.)

Summary of Contents for Color imageRUNNER C2880i























































































































































































































































































































































































































































































Reviews:

No comments