manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 448

11-13

Recycling Used Cartridges

M

ain
tenanc

e

Recycling Used Cartridges

Canon has instituted a worldwide recycling program for cartridges called 
“The Clean Earth Campaign”. This program preserves precious natural 
resources by utilizing a variety of materials found in the used cartridges 
that are of no further use, to remanufacture new cartridges which, at the 
same time, keeps the environment cleaner by reducing landfill waste. 
Complete details concerning this program are enclosed in each Cartridge 
box.

The Clean Earth Campaign - The Canon Cartridge Return Program

The Canon Cartridge Return Program fulfills the first initiative of Canon’s Clean Earth Campaign, which 
supports four critical environmental areas:

Recycling in the Workplace
Conserving Environmental Resources
Scientific Research and Education
Encouraging Appreciation of the Outdoors

“Clean Earth” initiatives supported by Canon in the U.S. include Eyes on Yellowstone, Canon Envirothon, 
NATURE Series on PBS and The Canon Clean Earth Crew. Initiatives supported in Canada include Canon 
Envirothon and World Wildlife Fund - Canada.

Since its inception, The Canon Cartridge Return Program has collected millions of cartridges that otherwise 
would have been discarded into landfills or similar facilities. Instead, this rapidly growing program recovers 
used cartridges and separates them into components which are then put to various industrial uses.

Becoming a part of this worthwhile program is easy. When your cartridge is of no further use, simply follow 
the instructions detailed for U.S. or Canadian residents.

We appreciate your support of The Canon Cartridge Return Program.

Working together we can make a significant contribution to a cleaner planet.

Cartridges collected through this program are not refilled.
This program may be modified or discontinued without notice.

●
●
●
●

●
●

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands