manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 279

Fax

5-58

Sending Originals at a Preset Time (Delayed Sending)

Sending Originals at a Preset Time (Delayed 

Sending)

The delayed sending mode enables you to store a send job in memory, and have it sent at a 
later time. 
The default setting is <Off>.

You can reserve up to 70 jobs for the delayed sending. However, the actual number of jobs that can be reserved may be 
less than 70, depending on the following conditions:

If multiple documents are being sent at the same time.
If large documents are being sent.
If there are jobs other than delayed sending.

Once the delayed documents are sent, the documents are automatically deleted from memory.
You can check the status or cancel the transmission of jobs for which a preset send time has been specified. (See 
“Checking/Deleting Fax Transmission Documents,” on p. 5-147.)

–

•
•
•

–
–

1

 

Place your originals.

2

 

Press 

 (Main Menu).

3

 

Use [

▼

], [

▲

] or   (Scroll Wheel) to select 

<Send/Fax>, then press [OK].

4

 

Specify a destination.

For details about how to specify destinations, see 
“Specifying Destinations,” on p. 5-30.

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands