Canon Color imageCLASS MF8580Cdw, Service Manual

Page: 387 / 401

8
8
8-39
8-39
Service Mode > FAX > Setting of NCU Parameters > TONE/PULSE
Service Mode > FAX > Setting of NCU Parameters > TONE/PULSE
Numeric parameter setting mode M82 M85
No. Parameter Allowable setting range
53 Set DTMF calling counts when receiving FAX
remotely
10 to 9999 (default 25)
○ ○
54 Set Busy Tone outgoing duration when using handset ○ ○
55 - 80 Not in use - -
T-8-31
Setting of NCU Parameters
■ TONE/PULSE
Operation Method
1) Setting of Tone Parameters
While "#NCU" is displayed, press "OK" key -> Select "#TONE" and press "OK" key so that
it becomes tone parameter setting mode.
2) Setting of Pulse Parameters
While "#NCU" is displayed, press "OK" key -> Select "#PULSE" and press "OK" key so that
it becomes pulse parameter setting mode.
Item Function Setting range M82 M85
TONE 01; Tone signal sending time
(PSTN)
10 to 9999 (msec)
○ ○
02; Minimum pause time (PSTN) 10 to 9999 (msec) ○ ○
PULSE PULSE FORM Pulse digit format 0 -> DP (N)
1 -> DP (N+1)
2 -> DP (10-N)
○ ○
PULSE NUM 01; - - - -
02; - - - -
03; Pulse dial make ratio 10 to 90 (%) ○ ○
04; Minimum pause time 10 to 9999 (msec) ○ ○
T-8-32