Canon Color imageCLASS MF8580Cdw, Service Manual

Page: 386 / 401

8
8
8-38
8-38
Service Mode > FAX > List of NUM
Service Mode > FAX > List of NUM
List of MENU
Menu switch registration mode M82 M85
No. Parameter Selection
01 - 04 Not in use - -
05 - - - -
06 Telephone line monitor 0 - 3
0: DIAL, 1: SERVICEMAN1, 2:
SERVICEMAN2, 3: OFF
○ ○
07 Transmission level (ATT) 0 - 15 ○ ○
08 Upper limit of V.34 modulation speed 0 - 5
0: 3429 BAUD, 1: 3200 BAUD, 2: 3000
BAUD, 3: 2800 BAUD, 4: 2743 BAUD, 5:
2400 BAUD
○ ○
09 Upper limit of V.34 data speed 0-13
0: 33.6 kbps, 1: 31.2 kbps, 2: 28.8 kbps, 3:
26.4 kbps, 4: 24.0 kbps, 5: 21.6 kbps, 6:
19.2 kbps, 7: 16.8 kbps, 8: 14.4 kbps, 9:
12.0 kbps, 10: 9.6 kbps, 11: 7.2 kbps, 12:
4.8 kbps, 13: 2.4 kbps
○ ○
10 OFF Hook signal frequency 0-2
0: 50 Hz, 1: 25 Hz, 2: 17 Hz
○ ○
11 - 20 Not in use - -
T-8-30
List of NUM
Numeric parameter setting mode M82 M85
No. Parameter Allowable setting range
01 Not in use - -
02 RTN transmission criteria X 1 to 99 % ○ ○
03 RTN transmission criteria n 2 to 99 times ○ ○
04 RTN transmission criteria m 1 to 99 lines ○ ○
05 NCC pause (before ID code) 1 to 60 sec ○ ○
06 NCC pause (after ID code) 1 to 60 sec ○ ○
07 Spare - -
08 STORED_DIAL_MODE wait timer 0 to 65 sec ○ ○
09 Not in use - -
10 T.30 T0 timer 55 sec principally ○ ○
11 T.30 T1 timer (for incoming transmission) 0 to 9999
(France: 3500, Others:
3000)
○ ○
12 Maximum incoming lines 0 to 65535 (line)
0: without limitation
○ ○
13 T.30 EOL timer 500 to 3000
(set to 55 sec by default) ○
○
14 Not in use - -
15 Threshold between hokking nad on-hook 0 to 999 ○ ○
16 Lead time to the first response when switching
between FAX and TEL
0 to 9
○ ○
17 Duration to activate pseudo-RBT cadence 0 to 999 ○ ○
18 Duration to deactivate pseudo-RBT cadence (short) 0 to 999 ○ ○
19 Duration to deactivate pseudo-RBT cadence (long) 0 to 999 ○ ○
20 Duration to activate pseudo-ring cadence 0 to 999 ○ ○
21 Duration to deactivate OFF Hook cadence (short) 0 to 999 ○ ○
22 Duration to deactivate OFF Hook cadence (long) 0 to 7 ○ ○
23 - - - -
24 - - - -
25 CNG monitor duration while the answering device is
activated
0 to 999
○ ○
26 - - - -
27 - - - -
28 Not in use - -
29 Off-hook PCB duty settings
(For NAC, setting can be made with SPL71100 in
special management mode.)
20 (*10ms)
○ ○
30 - 48 Not in use - -
49 NSX MODEL ID 0 to 4095 ○ ○
50 Not in use - -
51 Threshold to detect hook 10 to 9999 ○ ○
52 Not in use - -