37
Co
py
Change the Default Copy Settings
You can change the default copy settings that are applied when the machine is restarted,
[
] is pressed or the screen is returned to the default screen after auto reset is performed.
1
Press [
].
2
Press [
▲
] or [
▼
] to highlight <Copy Settings>, and then press [OK].
3
Press [
▲
] or [
▼
] to highlight <Change Default Settings>, and then press
[OK].
4
Press [
▲
] or [
▼
] to highlight the desired option, and then press [OK].
<Number of
Copies>
Select the copy quantity.
<Density>
Make the density lighter or darker.
<Original Type>
Select the image quality.
<2-Sided>*
Copy 1-sided document to 2 sides.
<Copy Ratio>
Select the copy ratio.
<Paper>
Specify the paper source.
<N on 1>
Copy multiple documents onto one sheet.
<Collate>
Collate copies of a complete copy job arranged in page
sequential order or by page.
<Erase Frame>
Specify the width of the frame to erase.
<Sharpness>
Emphasize the outline of the image or decrease the contrast.
<Color Balance>
Adjust the levels of yellow, magenta, cyan, or black.
* MF8580Cdw only
5
Specify the desired setting.
6
After you have specified the setting, press <Apply>.
7
Press [
] to close the screen.
You can register frequently used combinations of copy settings as
favorite settings (modes) on this machine. For details, see [
Copying
]
[
Configuring Copy Settings to Your Needs
]
[
Registering
Combinations of Frequently Used Copy Settings
] in the e-Manual.
Summary of Contents for Color imageCLASS MF8580Cdw
Page 38: ...38 38 Memo...
Page 72: ...72 72 Memo...
Page 92: ...92 92 Memo...
Page 119: ...119 119 Memo...