Canon Color imageCLASS MF8280Cw, Service Manual

Page: 384 / 401

8
8
8-36
8-36
Service Mode > FAX > List of SSSW
Service Mode > FAX > List of SSSW
FAX
List of SSSW
FAX > SSSW M82 M85
SSSW No. Bit No. Function
SW 01 (Switch relating to error and copy)
Bit 0
Output of error code for service technician ○ ○
Bit 1 Error memory dump ○ ○
Bit 2 Entry of password at transfer of confidential received image - -
Bit 3 Prohibition of copy - -
Bit 4 - - -
Bit 5 - - -
Bit 6 Prohibition of date/time settings by user - -
Bit 7 Batch cancellation of prohibition of user setting - -
SW 02 (Switch relating to settings for network connection condition)
Bit 0
Prohibition of startup when memory clear list cannot be output - -
Bit 1 - - -
Bit 2 - - -
Bit 3 - - -
Bit 4 V34 CCRTN OFF - -
Bit 5 - - -
Bit 6 - - -
Bit 7 Connect the terminal as F network type 2 ○ ○
SW 03 (Switch relating to echo prevention)
Bit 0
TCF EQM check ○ ○
Bit 1 - - -
Bit 2 - - -
Bit 3 - - -
Bit 4 - - -
Bit 5 - - -
Bit 6 - - -
Bit 7 Output 1080Hz before CED ○ ○
SW 04 (Switch relating to prevention of communication problems)
Bit 0
Monitoring of LC - -
Bit 1 Frequency check of CI signal ○ ○
Bit 2 V.21 end flag - -
Bit 3 Prohibit T.30 node F kept by both parties ○ ○
Bit 4 T.30 node F echo timer ○ ○
Bit 5 Frequency check of CI signal at PBX settings ○ ○
Bit 6 No CNG transmission at the time of manual transmission ○ ○
Bit 7 No CED transmission at the time of manual transmission ○ ○
FAX > SSSW M82 M85
SSSW No. Bit No. Function
SW 05 (Switch relating to standard functions and DIS signal settings)
Bit 0
- - -
Bit 1 mm/inch conversion (text mode) - -
Bit 2 mm/inch conversion (text/photo mode / photo mode) ○ ○
Bit 3 Prohibition of bit transmission after DIS bit 33 ○ ○
Bit 4 Declaration of cut paper ○ ○
Bit 5 Declaration of LTR/LGL by DIS - -
Bit 6 Prohibition of ECM transmission - -
Bit 7 Prohibition of ECM reception - -
SW 06 (Switch relating to settings for reading condition)
Bit 0
Shifting from DES to pre-scan position - -
Bit 1 Pre-scan at times other than power-on - -
Bit 2 Limitation on original length - -
Bit 3 Stamp option - -
Bit 4 Scan width 0: A4, 1: LTR ○ ○
Bit 5 Recording by dividing data into multiple files at the time of
memory copy
- -
Bit 6 Variability of resolution at the time of copy - -
Bit 7 Ha Super fine - -
SW 07 - SW 11 Not in use
SW 12
(Switch relating to settings for page timer)
Bit 0
Timeout period for 1 page (transmission) ○ ○
Bit 1 Timeout period for 1 page (transmission) ○ ○
Bit 2 Timeout period for 1 page (Halftone transmission) ○ ○
Bit 3 Timeout period for 1 page (Halftone transmission) ○ ○
Bit 4 Timeout period for 1 page (Reception) ○ ○
Bit 5 Timeout period for 1 page (Reception) ○ ○
Bit 6 - - -
Bit 7 Timeout period for 1 page ○ ○
SW 13
Bit 0 Prohibition of relay broadcasting/forwarding at the time of
relay/forwarding reception
- -
Bit 1 Response in case of image failure at the time of relay/
forwarding reception
- -
Bit 2 Execution of mm/inch conversion when sending the received
image
○ ○
Bit 3 - - -
Bit 4 - - -
Bit 5 - - -
Bit 6 - - -
Bit 7 - - -