Canon Color imageCLASS MF746Cdw, User Manual

Page: 147 / 773

Placing Originals
3S1Y-02U
Place originals on the platen glass or in the feeder. Use the platen glass when scanning thick or bound documents
such as books. You can load two or more sheets of originals in the feeder so that they can be scanned continuously.
For information on loadable sizes, etc., see Main Unit(P. 659) or Feeder(P. 663) .
Placing Originals on the Platen Glass(P. 140)
Placing Originals in the Feeder(P. 140)
Use originals that are completely dry
● When placing originals, make sure that any glue, ink, or correction fluid on the originals has completely
dried.
To avoid paper jams
● Do not place the following types of originals in the feeder as this may cause paper jams:
- Wrinkled or creased paper
- Carbon paper
- Curled or rolled paper
- Coated paper
- Torn paper
- Onion skin or thin paper
- Stapled or clipped originals
- Paper printed by a thermal transfer printer
- Transparencies
To scan originals more accurately
● Originals placed in the feeder are scanned while being fed into the machine. On the other hand, originals
placed on the platen glass remain in a fixed position while they are scanned. To ensure more accurate
scanning results, placing originals on the platen glass is recommended.
To scan tracing paper or transparencies
● To scan transparent originals (for example, tracing paper or transparencies), place them on the platen glass.
Basic Operations
139