Setting the Receive Mode
5-2
Receiv
ing F
a
x
e
s
5
- <DRPD> to distinguish between fax and voice calls by using Distinctive Ring Pattern
Detection.(See "Receiving with a DRPD (Distinctive Ring Pattern Detection) Service:
DRPD," on p. 5-5.)
- <Manual> for the connected telephone to ring for fax and voice calls. Fax calls must
be answered manually. (See "Receiving Faxes Manually: Manual Mode," on p. 5-7.)
NOTE
If you set <5. MAN/AUTO SWITCH> to <ON> in <RX SETTINGS> in <FAX SETTINGS>
of the Menu, the machine will receive faxes automatically even when the receive mode is
set to <Manual>. (See <5. MAN/AUTO SWITCH> of "Menu Descriptions," on p. 8-5.)
5
Press [Stop/Reset] to return to the standby display.
NOTE
You can save the toner consumption when printing out the received documents. (Refer to
Chapter 10, "Machine Settings," in the
Basic Guide.
)
Receiving Faxes Automatically: FaxOnly Mode
If you want to select <FaxOnly>, check the following:
■
Select This Mode If:
•
you have a dedicated telephone line for fax use only.
•
you only want to receive faxes automatically with the machine.
■
You Will Need to:
set <FaxOnly>. (See "Setting the Receive Mode," on p. 5-1.)
■
When You Receive a Fax Call
The machine will receive the fax automatically.
■
When You Receive a Voice Call
You will not be able to answer the call.
NOTE
•
If you connect a telephone to the machine and enable the <INCOMING RING> setting,
the telephone will ring when the machine receives a voice call, and then you can answer
the call.
•
You can select the number of rings. (See <4. INCOMING RING> of "Menu Descriptions,"
on p. 8-5.)