Canon Color image RUNNER LBP5360, User Manual

Page: 238 / 444

6-55
Pr
inting En
vironment Settings
6
SETUP Menu Settings
■
STD FORMAT
-
Erases the contents of the hard disk.
STD FORMAT performs a standard format of the hard disk. Perform this operation
when the problem is not solved by executing QUICK FORMAT.
IMPORTANT
•
If the message <CANNOT EXECUTE> appears when STD FORMAT is executed,
the hard disk is not formatted.
•
When performing STD FORMAT, remove all the interface cables (the LAN cable,
USB cable, and printer cable) connected to this printer.
•
While STD FORMAT is being executed, <FORMATTING> is displayed in the
display. Wait for a moment until the format is completed.
NOTE
This item is displayed only when an optional hard disk is installed.
SP.PRINT MODE
■
COATED PAPER
OFF*, ON
Specify the setting for this item according to the type of the coated paper to be
used.
•
OFF: Specify when printing coated paper of 27.9 lb Bond to 44.4 lb Cover (105
to 120 g/m
2
).
•
ON: Specify when printing coated paper of 44.5 to 59.2 lb Cover (121 to 160 g/
m
2
).
■
CURL ADJUSTMENT
OFF*, ON
When printed paper curls (the printed side curls outward), specify whether the
curl should be straightened out.
•
OFF: The curl of the printed paper is not straightened out.
•
ON: The curl of the printed paper is straightened out. By doing so, you may
improve the printout results.
IMPORTANT
If continuous printing is performed with this item set to ON, the printing speed may
drop.