4
4
4-21
4-21
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points (ADF) > Exchanging the Feed Guide
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points (ADF) > Exchanging the Feed Guide
Replacing the Stamp
1)Open the feeder cover and separation guide.
2) Using tweezers, remove the stamp
3)Using tweezers or the like, attach a new stamp.
Be sure to attach the new stamp with the stamp face up.
4)Close the feeder cover and separation guide.
CAUTION:
If the stamp is floating, a jam can occur. Be sure to push in the stamp until it clicks.
NOTE:
When replacing the consumable parts, be sure to clear the parts counter.
(Lv1.COPIER > COUNTER > DRBL-2 > STAMP )
F-4-46
Exchanging the Feed Guide
1) Open the ADF.
2) Remove the feed guide .
-Screw , 2 pcs.
x2
3) Pell off the release paper of the new feed guide.
4) Attach the new feed guide.
NOTE:
When replacing the consumable parts, be sure to clear the parts counter.
(Lv1.COPIER > COUNTER > DRBL-2 > LNT-TAPE1 )
F-4-47