Canon CLC5151, Sending And Facsimile Manual

Page: 89 / 476

Specifying Destinations Using the New Address Tab 2-27
2
Basic Sending Methods
NOTE
•
Only one User Inbox can be specified as the destination at a time.
•
To be able to send a link via e-mail, it is necessary to register an e-mail address in the User Inbox
beforehand. For instructions on storing an e-mail address in the machine, see Chapter 8,
"Customizing Settings," in the Copying andMail Box Guide.
•
If the URL Send mode is set, and you specify a group destination that includes a User Inbox as a
send destination, the error message <Cannot send when an inbox is included in the Group
Address for [URL Send]. Please enter the settings again.> may be displayed.
Sending Documents to Yourself
If SDL or the Local Device Authentication user authentication system of SSO is set as the login
service, you can press [Send to Myself] to specify your e-mail address (registered in SDL or the
Local Device Authentication user authentication system of SSO) as the destination.
IMPORTANT
•
If SDL or the Local Device Authentication system of SSO is set as the login service, your e-mail address
registered in SDL or the Local Device Authentication system of SSO is set as the destination.
•
If the Domain Authentication system of SSO (including when performing domain authentication with the
'Domain Authenti Local Device Authentication' system) is set as the login service, your e-mail
address registered in Active Directory or NetSpot Accountant is set as the destination.
•
For more information on the SDL and SSO login services, see Chapter 2, "Basic Operations," in the
Reference Guide.
1
Press [New Addresses]
➞
[Send to Myself].