Canon CLC5151, Sending And Facsimile Manual, Page: 64 / 476

Specifying Destinations Using the New Address Tab 2-2
2
Basic Sending Methods
Specifying Destinations Using the New
Address Tab
You must specify the destination (such as a fax number, e-mail address, I-fax address, or file
server address) to send documents. This section describes the procedure for specifying
destination that has not been stored in the Address Book.
IMPORTANT
The destination that you just specified is not stored in the Address Book. It is deleted once the
document is sent.
NOTE
•
If you frequently send documents to the same destinations, store these destinations in the Address
Book beforehand. (See "Storing New Addresses," on p. 10-5.)
•
A maximum of 64 new addresses and addresses obtained via a server (User Inboxes are not included in
this count) can be specified at the same time.
•
If the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated, you can
specify e-mail addresses, I-fax addresses, file server addresses, and a User Inbox.
•
If the optional Super G3 FAX Board is installed, you can specify fax numbers and a User Inbox.
•
To view the detailed information of a selected destination, select the destination
➞
press [Details].
•
You can change, edit, or erase destinations on the Send Basic Features screen before scanning.
(See "Checking/Changing a Destination," on p. 2-40, or "Erasing a Destination," on p. 2-42.)