Canon CLC5151, Sending And Facsimile Manual

Page: 338 / 476

Communications Settings 11-6
11
Syste
m
Man
age
r Set
ti
ng
s
■
Divided Data RX Timeout
If it takes longer than the set Divided Data RX Timeout time to receive all the parts of a divided I-fax
document, only the data which has been received is combined to form the document. Data which can be
combined to form complete pages is printed, and any remaining data is erased.
IMPORTANT
•
If you delete the divided data, it cannot be combined to form a document even if the remaining divided
data is received later.
•
Divided data cannot be printed as a regular image unless it has been combined.
•
If you select [Print When Erased] on the Divided Data RX Inbox screen for the Mail Box function to print
the data which is erased, the data will not be forwarded or stored in memory. It will only be printed.
■
Default Subject
The subject that you enter here is used as the default subject whenever you do not enter a subject when
sending a job.
■
Print MDN/DSN on Receipt
Sets whether to print notification e-mail messages that inform you of the successful delivery of I-fax jobs
sent using the Full Mode.
■
Always Send Notice for RX Errors
Sets whether to inform the sender that the e-mail message or I-fax was not received successfully.
■
Use Send Via Server
Determines whether you can select to send jobs via a server on the screen for specifying I-fax
destination settings. To be able to select 'On' or 'Off' for <Send Via Server> in E-mail/I-Fax Settings in
Communications Settings in System Settings (from the Additional Function screen), set <Use Send Via
Server> and <Allow Not Via Server> to 'On' beforehand.
■
Allow MDN Not Via Server
Sets whether to allow the recipient machine to send MDN (Mail Delivery Notification) mail directly to the
IP address of the sending machine without going via a mail server.