Canon CLC5151, Sending And Facsimile Manual

Page: 296 / 476

Storing New Addresses 10-10
10
Sto
ring/
Edit
in
g
Addr
ess Bo
ok Se
tt
ing
s
IMPORTANT
If you want to attach a subaddress to your send job, make sure that the recipient's fax machine
supports ITU-T standard subaddresses.
NOTE
If Use Asterisks to Enter Access No./Passwords in System Settings (from the Additional
Functions screen) is set to 'Off', the password you enter is not displayed as asterisks. (See
Chapter 6, "System Manager Settings," in the Reference Guide.)
8
Finish storing the address.
●
If Access Number Management is set to 'On':
❑
Press [Next].
❑
Press [Access Number].
❑
Press [Access Number]
➞
enter the access number using - (numeric keys).
❑
Press [Confirm]
➞
re-enter the access number for confirmation
➞
press [OK]
➞
[OK].
If you do not want to set an access number for this destination, press [OK] without entering
any number.
●
If Access Number Management is set to 'Off':
❑
Press [OK].
E-Mail Addresses
NOTE
This mode is available only if the Color Universal Send Kit (standard-equipped for the iR C4580i/iR
C4080i) is activated.
1
Press
➞
[Address Book Settings]
➞
[Register Address]
➞
[Register New Address].
If necessary, see the screen shots in step 1 and step 2 of "Fax Numbers," on p. 10-6.