Canon CLC5151, Sending And Facsimile Manual

Page: 179 / 476

Sending Methods 5-23
5
Sending Documents
7
Press [Start].
8
Press [Yes].
9
Verify the images
➞
press [Start Send].
You can press [ ] (reduce) or [ ] (enlarge) to zoom in or out.
You can press [ ], [ ], [
▼
], or [
▲
] to specify the area to display when you zoom in or out on the
page.
When your image is enlarged or reduced, you can see the general location of which area you
are previewing with
(above the reduce and enlarge icons).
NOTE
The number of scanned pages is displayed on the Send Process screen.
Stamping Originals
The machine can print a stamp (approximately 3 mm in diameter) on the front side of scanned
and sent originals.
IMPORTANT
•
The Stamp mode cannot be used with the Document Size Select (Other Size), or 2-Page Separation
mode.
•
The Stamp mode cannot be used when sending a fax document in the Direct Sending or Manual
Sending mode.
Vertical Placement Horizontal Placement
Position at which
stamp is applied
Position at which
stamp is applied