Canon CLC5151, Sending And Facsimile Manual

Page: 124 / 476

Scan Settings 3-18
3
Bas
ic Sc
an
n
ing
F
e
atu
res
3
Press [ ] or [ ] to adjust the scanning exposure
➞
[OK].
Press [ ] to move the indicator to the left to make the exposure light, or press [ ] to move the
indicator to the right to make the exposure darker.
4
Press .
Automatic Exposure Adjustment
This mode enables you to set the machine to automatically adjust the scan exposure to the level
best suited to the quality of the original.
IMPORTANT
When using Direct Sending or Manual Sending mode for sending a fax, the automatic scan adjustment
mode cannot be used.
NOTE
There are two types of automatic scan exposure adjustments. The Remove Background mode enables
you to scan by erasing the background colour of the original, and the Prevent Bleeding mode enables
you to prevent the original image on the reverse side of the original from appearing on the scanned
pages. Select the desired scan exposure adjustment mode depending on the type of original. The
Remove Background mode is selected by default. (See "Image Quality Adjustment," on p. 4-15.)