Canon CLC5151, Sending And Facsimile Manual

Page: 119 / 476

Scan Settings 3-13
3
Bas
ic Sc
an
n
ing
F
e
atu
res
Resolution
You can specify the resolution before scanning the original.
IMPORTANT
•
The maximum size of an image that you can send at 600 x 600 dpi resolution is A3. If the image
exceeds this size, it may be cut off.
•
If the optional Super G3 FAX Board is installed and you are sending documents by fax, the maximum
size of an image that you can send at 400 x 400 dpi resolution is A3.
•
If you are sending documents by fax, select Black 200 x 100 dpi, Black 200 x 200 dpi,
Black 200 x 400 dpi, or Black 400 x 400 dpi. Otherwise, the document will be sent with poor resolution.
•
If you send a long strip original at 600 x 600 dpi, the periphery of the original image may be cut off
slightly.
NOTE
•
If the optional Super G3 FAX Board is installed but the Color Universal Send Kit (standard-equipped for
the iR C4580i/iR C4080i) is not activated, you cannot select 100 x 100 dpi, 150 x 150 dpi, 300 x 300 dpi,
or 600 x 600 dpi as the resolution.
•
To cancel the scan settings, press the Scan Settings drop-down list
➞
press [Option]
➞
[Cancel].
1
Place your originals
➞
specify the destination
➞
press the Scan
Settings drop-down list
➞
press [Option].
For more information on specifying the destination, see Chapter 2, "Basic Sending Methods."